GZH040-15C
Image unavailable
GZH040-15C is a thin wheel grinding bur for edge refinement, slot access, and coarse trimming of pre-sintered zirconia in the dental lab.
- Working Length (mm)
- 0.4
- Max Head Diameter (mm)
- 15
Technical details
| Working Material | Aluminum Oxide |
|---|---|
| Working Length (mm) | 0.4 |
| Max Head Diameter (mm) | 15 |
About this product
GZH040-15C is a thin wheel-style grinder for pre-sintered zirconia finishing tasks that require a flat, narrow contact area. Dental technicians can use it for edge correction, separating access, trimming sprue marks, and refining linear transitions on milled zirconia frameworks before final sintering. The gray Aluminum Oxide abrasive and silicone binder are intended for controlled grinding on the lower-strength green-state material. Its wheel geometry helps reach areas where a cone or egg head would be too bulky, while supporting clean, deliberate passes with light pressure.
Similar models
Explore models in this category. Check each product’s specifications to find the right fit.
| Model | Max Head Diameter (mm) | Working Length (mm) |
|---|---|---|
GZH040-15CCurrent model
|
15 | 0.4 |
GZH204-10MF
|
10 | 24 |
GZH243-10MF
|
10 | 20 |
GZH243-5C
|
5.5 | 13 |
GZH243-6MF
|
6 | 16 |
GZH275-6C
|
6.5 | 13 |
GZH507-10MF
|
10 | 22.5 |
Inquire about this product
Tell us your quantity, market, and requirements. Our team will help with your next step.
Prefer to email us?
mail@dianfong.com