GZH275-6C
Image unavailable
GZH275-6C is a coarse egg-shaped zirconia finishing bur for broad reduction and contour adjustment on pre-sintered dental restorations.
- Working Length (mm)
- 13
- Max Head Diameter (mm)
- 6.5
Technical details
| Working Material | Aluminum Oxide |
|---|---|
| Working Length (mm) | 13 |
| Max Head Diameter (mm) | 6.5 |
About this product
GZH275-6C gives dental labs a broad-contact option for coarse adjustment of pre-sintered zirconia. Its egg-shaped head works well on convex anatomy, occlusal contours, pontic surfaces, and larger milled areas that need smoothing before sintering. The gray Aluminum Oxide abrasive is held in a silicone binder to cut the softer green-state zirconia with a controlled feel. It is a practical first-step bur for removing machining marks, easing sharp transitions, and preparing the restoration surface for finer pre-sintering polishing where a smoother final result is required.
Similar models
Explore models in this category. Check each product’s specifications to find the right fit.
| Model | Max Head Diameter (mm) | Working Length (mm) |
|---|---|---|
GZH275-6CCurrent model
|
6.5 | 13 |
GZH040-15C
|
15 | 0.4 |
GZH204-10MF
|
10 | 24 |
GZH243-10MF
|
10 | 20 |
GZH243-5C
|
5.5 | 13 |
GZH243-6MF
|
6 | 16 |
GZH507-10MF
|
10 | 22.5 |
Inquire about this product
Tell us your quantity, market, and requirements. Our team will help with your next step.
Prefer to email us?
mail@dianfong.com